For Corsair 3Pin / 4Pin RGB to JST-SM Addressable RGB Adapter Connector Cable 5V

Description

For Corsair 3Pin / 4Pin RGB to JST-SM Addressable RGB Adapter Connector Cable 5V
Item Describe
:
Brand New and High Quality
Cable Length: 25cm
You'll need to configure your devices in iCue based on the number of LEDs. You can choose from HD (12 LEDs), LL (16 LEDs), and ML (4 LEDs) fans or RGB Strips (10 LEDs). Do not configure them as SP-RGB fans!
You'll need to count the number of LEDs on your devices and then configure the lighting channel to have the same (or slightly greater) number of LEDs. Example: 1 Phanteks Aura-compatible ARGB Strip has 30 LEDs. This is then configured in iCue as 3 RGB Strips (30 LEDs). It could also be configured as 3 HD Fans (36 LEDs) or 2 LL fans (32 LEDs). The Lian Li Strimer (24-pin) has 12 LEDs and is best configured as an HD-RGB Fan. Experimenting with the setup can lead to some interesting effects.
This will not allow you to control your motherboard or GPU LEDs. Those aren't controlled by connecting wires. This will only control 5V Addressable RGB LEDs.
This will not allow you to control 12V (4-pin) analog LEDs. They operate on a different protocol and are incompatible.
This does not work with the new Commander Core that is included with the new iCUE Elite Capellix Coolers.
Compatible Model:
For the Lighting Channel version:
This will connect to a single RGB Lighting Channel on either a Corsair Commander Pro or Lighting Node Pro.
If your device does not have its own power source, you need to make sure that the current draw on a single Corsair Lighting Channel is limited to approximately 2A (10W). This will come out to roughly 60 RGB LEDs, however you'll need to check the specifications of any LEDs that you connect. If you exceed the limit, you may blow a fuse in your Lighting Channel.
For the RGB LED Fan Hub / Lighting Node Core version:
This will connect to a fan port on the Corsair RGB LED Fan Hub or Lighting Node Core.
If your device does not have its own power source, you need to make sure that the current draw on a single Corsair RGB LED Fan Hub / Lighting Node Core is limited to approximately 4A (20W). This will come out to roughly 120 RGB LEDs, however you'll need to check the specifications of any LEDs that you connect. If you exceed the limit, you may blow the capacitor in the RGB LED Fan Hub / LNC.
The RGB LED Fan Hub connection will duplicate the signal to the next device on the fan hub. For example, if you use this adapter to connect a Lian Li Strimer (12 LEDs) to an RGB LED Fan Hub / Lighting Node Core on port 1 and then a Corsair HD-RGB fan on port 2 (also 12 LEDs), the Corsair fan and the Lian Li Strimer will have identical effects. In iCUE, this would be configured as a single HD-RGB Fan. Keep this in mind when configuring your lighting channels.
Package included:
1 x Cable
Please Note:
Please check part photos, part number (OE# of your old part), part description and compatibility chart above carefully and compare them with your old part to make sure it is what you need.
Any questions please contact us by clicking ask a question at the bottom of this page or click contact seller in the purchase history.
Shipping:
We usually ship within 1 Business day of received/cleared payments.
In case of you do not provide a physical and valid address, we will only ship the package after you confirmed the address.
Please understand that once orders are shipped, we cannot control the transit times thereafter.
Return & Refund:
Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.
Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.
30 days return accpted
Contact us:
If you have any questions, please leave us a message, we will reply back to you within 24 hours. Thank you.
On Jun 29, 2022 at 15:08:10 PDT, seller added the following information: